S1: Material preparation, select Q235 steel bars as raw materials, and store in a dry rust and corrosion area for storage after the selection of materials.
S2: The material removing the rust, the polishing machine is polished to polish the surface of the material, and the rust of the material is removed.
S3: Nailing
1. Brushing, drawing the reinforced material after rust removal in the drawing machine, drawing the diameter of the nail as needed to choose the diameter, pulling the reinforcement into the diameter of the nail.
2. Stamping the reinforced material after brushed the brushed reinforcement materials in the cold equipment, and the punch of the nail tip to complete the nails to complete the production.
3. Polishing, adding the nails to the polishing machine for polishing, the speed of the polishing machine is 150-180 rpm/minutes, and the polishing time is controlled at 30-40 minutes.
Angle: 15 degree flat or 16 degree conical, 11 degree, 0 degree.
Diameter: 0.083" 0.092" 0.099" 0.113" 0.120" 0.131" 0.148"
Length: 25mm-130mm.
Shanks: smooth, ring, screw.
Point: diamond, chisel, blunt.
Finish: bright, E.Galv. M.Galv. H.D Galv. 304 316 stainless steel.
We also can customize according to client’s requirements if they need.