Wire drawing machine belonging to the standard parts and other metal products production pre-processing equipment, the purpose is to be produced by the steel manufacturer transported to the standard parts and other metal products production enterprises of the wire or bar through the drawing machine drawing processing, so that the wire or bar diameter, roundness, internal metallographic structure, surface finish and straightness are to standard parts and other metal products production needs of raw material processing requirements. Therefore, the quality of the pre-treatment of the wire rod or bar by the drawing machine is directly related to the quality of the products of standard parts and other metal products manufacturers. Wire drawing machine belongs to the metal products equipment industry metal wire drawing machine, wire drawing machine is widely used in the production and pre-processing of steel wire, rope wire, pre-stressed steel wire, standard parts and other metal products.
The main products are complete sets of iron wire drawing machines, capable of drawing from 6.5 mm to 0.13 mm for small, medium and large sizes; stainless steel hydrogen annealing furnaces and winding machines, wire drawing machines capable of drawing from 8 mm to 0.05 mm. Stainless steel drums and take-up tubes are made of special castings with ingredients such as white iron, which are very hard and have a long service life with high wear resistance. Galvanising machine can be plated with 0.5-4 mm wire, upper plate or large shaft, hitting the shaft flat and even, the same degree of elasticity. Straight wire machine can straighten 1.8 – 6.5 mm, is a straight wire machine for weaving mesh, hardware construction, etc. Copper wire drawing machine complete set of equipment, in addition to the user can also produce a variety of wire mesh machinery and ancillary products and accessories, etc. General wire drawing machine is mainly driven by the wire motor and the wire motor and line motor constitute the driving part, with the collection of the wire diameter does not expand the speed of the wire motor should be reduced accordingly to ensure constant line speed, often used in the control of the tension feedback device to adjust the speed of the wire motor. As the function of the inverter continues to enhance, the performance of the stable, inverter is also used in the drawing machine, which uses the inverter to control the winding motor and the discharge motor, while the row of wire motor due to the smaller power directly by the grid voltage to control.
Post time: May-05-2023