Pneumatic nail gun can be used for container pallets, large wooden packing boxes to make fences, wood structure connection of houses, wooden furniture and other wooden structure connection. Fast stitching, save labor costs. The pneumatic nail reel gun has about 300 nails at a time. The nails are rolled up in a disk shape. It is convenient to install nails, which can save working time and improve efficiency.
The working principle of the nail gun: The nail gun is composed of the body part and the nail box part. The body of the gun is composed of a gun shell, a cylinder, a recoil device, a trigger assembly, a firing pin assembly (gun tongue), a cushion, a gun nozzle and a bumper assembly. Using compressed air and atmospheric pressure difference, through the trigger switch to make the firing pin (piston) do reciprocating movement in the cylinder; The magazine part is composed of pushing the nail, fixed magazine, movable magazine and other accessories. The nail is sent to the slot of the gun cover by pressing spring or pulling spring. When the firing pin comes out from the gun mouth, the nail is hit.
Type of nail gun: Nail gun is divided into low pressure nail gun and high pressure nail gun according to the air pressure used in the work. Usually wood pallet, wood pallet, wood packaging and other production only need ordinary nail gun, that is, low pressure nail gun, its working pressure in 4-8kg, use ordinary nail, such as FS64V5, FC70V3 and so on. High pressure nail gun using air pressure is usually more than 10kg, the use of special plastic nail, can hit through cement blocks, thin iron sheets, etc. In addition, according to the length of nails used, the nail gun can be divided into :CN55, CN70, CN80, CN650M, CN452S and so on
Maintenance of the nail gun: When the nail gun is working, lubricating oil must be added frequently to reduce the wear of the parts because the firing pin needs to do piston movement in the cylinder. In addition, because the nail gun needs to rely on compressed air to provide power, and the air contains a lot of water, it is best to access an oil-water separator device (also called three-point combination) between the air compressor and the nail gun, to play a role of dehumidification, to avoid too much water into the nail gun inside the rubber ring due to immersion and expansion failure. In addition, in the dusty working environment, the surface dust of the nail gun should be removed regularly to prevent the dust from affecting the puller and the nail pusher.
Post time: Feb-15-2023