Drawing process belongs to the workpiece surface processing technology, is through the wire drawing machine in the workpiece surface to form a line pattern, play a decorative effect of a surface treatment means, because the surface of the wire drawing treatment can reflect the texture of the metal material, so the automatic drawing machine has been more and more enterprise applications.
Drawing machine in the industrial use is very wide: in machinery manufacturing, hardware processing, petrochemical, plastics, bamboo and wood products, wire and cable and other industries have to use. The more mainstream control mode is a constant tension automatic control system, this system uses all the domestic control unit composition, its structure is more compact, cheaper, more stable and reliable operation. Solve a lot of the main shortcomings of the original machine control system, but also to be able to break the line at a time to improve the capacity of a large margin.
According to its working principle, we know that wire drawing machine in the work, there is a need to heat the program. Is when the wire drawing machine barrel in heating, it is actually the use of heating rings to work, such a way of working leads to its use of more electricity.
The heating process of the wire drawing machine is: first of all, the heating ring needs to be heated to the state of heat, and then passed through it to the barrel, which is a heat transfer process. Therefore, in this transfer process, a part of the heat will certainly not be able to use was wasted, obviously, the waste of the heat is actually from the electricity.
In addition to a part of the heat loss in the transfer process, the surface of the heating ring will also be in contact with the air, therefore, another part of the heat is absorbed by the air, which is also a waste of electrical energy. Drawing machine operation, alone in the process of heat transfer in the heating circle, the loss of electricity reached about forty percent, it can be imagined, if you can effectively avoid the process of wasting electricity, played the purpose of energy saving.
In order to reduce electricity consumption, what needs to be done is to wrap a layer of insulation cotton on the surface of the drawing machine barrel, and then add the electromagnetic heating coil. Electromagnetic induction occurs when the electromagnetic heating coil is energized, the barrel automatically heats up, and the thermal insulation cotton prevents the heat from running into the air, saving at least thirty percent of the electricity.
Post time: Dec-28-2023