Some users have reflected that when the use of nail making machine in the production of nails in the work, often encountered in the production of nails there are some unqualified problems, for these nail making machine for the production of nails unqualified quality problems, I summarised, and now share the specifics with you, I hope it will help.
The first problem, the nail making machine produced by the nail has a crooked. For this problem, there are two general reasons, the first is the nail knife is crooked or broken; the second is the equipment of the mould appeared loose.
So, what is the solution to this problem? According to the reasons mentioned above, if the nail knife is skewed or broken, then measures should be taken as follows: check whether the nail knife is broken and skewed phenomenon, if the nail making blade is skewed, then the nails made will be skewed. Therefore, in the usual maintenance should pay attention to the protection of the equipment knife, which is also to ensure that the nail making machine to produce qualified nails of the basic requirements.
If the equipment is due to the loosening of the mould, then it should be checked to confirm whether this is the problem. If so, then the measures should be taken: appropriate adjustment of the nail making machine mould state, until it returns to normal, no longer appear the phenomenon of crooked nails.
The second problem, the nail making machine produces nails nail tip is not straight or bent. For this kind of problem, there are three general reasons, the first is the nail mould seat loosening; the second is the scissors edge does not meet the requirements; the third is the shear mechanism is not properly adjusted.
For the above problems, should be dealt with according to the specific causes, if it is the first reason, the measures should be taken as follows: check the nail making machine trapezoidal screw head with or without abnormalities, such as should be tightened nut loose col, tighten the nut.
If it is the second reason, then the measures should be taken: check the equipment tool situation, this is because for different hardness and strength of the material, the use of nail making machine tool should be different.
If it is the third reason, then we should take measures for: appropriate adjustment of the nail making machine shear mechanism, if necessary, some parts should be replaced with new treatment.
Post time: Aug-14-2023