A coil nailer is a tool mounted on a coil nailer used for various operations. Because of its simple structure, easy to use, fast and wide range of applications, it is widely used in various industries.
coil nailer can be divided into two kinds of manual and electric. Manual coil nailer is a simple, fast tool, but also the preferred tool for workers in the installation of fixed objects. An electriccoil nailer is a lightweight hand tool that can be retrieved into a tool kit after the fixing task is completed.
The coil nailer is often used when fixing objects. Because of its simple construction, ease of operation, speed and low cost, the coil nailer is ideal for fixing objects. Its operation principle is to rotate the handle while pressing down on the spring, so that the spring compression, so that the coil nailer into working condition, and then adjust the spring pressure by adjusting the handle on the gear to complete the nail work. At the same time by manually operating the switch on the handle to control the power on and off, in order to achieve safe, efficient and fast to complete the installation task.
When using the coil nailer, the following points must be noted
(1) When installing a fixed object, the appropriate gear should be selected for operation.
In general, use a low gear pressure for installation, and then finish the job with a high gear pressure.
(2) When installation needs to be done from zero, it must be done in a safe manner. It is best to start installation with low grade pressure and then gradually increase the grade to improve efficiency.
(3) When installing fixed objects, the head must not be in contact with the object to prevent damage to the tool.
(4) When using the nail roll gun, it must be placed in a smooth position. If it is accidentally crushed or slipped off, stop working and repair it immediately.
(5) When the task of fixing is completed, the power must be promptly disconnected and the handle pulled to the end position. If the installation needs to be done from scratch, the nail roll gun or hand tool in the kit should be used to do the installation. When using a coil nailer, you must pay attention to the distance between its handle and the ground. If it is too close, it can cause injury to the hand. If it is too far away, it will affect the efficiency and quality of work.
Post time: May-12-2023