ST-type Brad Nails have the characteristics that other nails do not have, so ST-type Brad Nails can not be replaced. With the rapid development of real estate, decoration industry, in the market demand for ST-type Brad Nails increased year by year, the existing production of ST-type Brad Nails can not well meet the demand. Manual nail row, not only low efficiency, and glue release of toxic gases affecting the health of workers, and in the winter glue to have a certain temperature, but also increase the volatilisation of toxic gases. This obviously greatly affects the large-scale production of ST-type Brad Nails. In the production process of ST-type Brad Nails, separation, glue, drying, cutting off in the project is easier to achieve. For example, the separation process can be used more commonly used electromagnetic vibrator to complete, this technology has been very mature, the market sales of this type of equipment is also more. Difficult to achieve is the automatic orientation, arrangement, because the steel row of nails used in ST-type Brad Nails is T-shaped but not common round, more special, conventional methods are not easy to achieve.
In this case, high-efficiency automatic nail device not only improves productivity but also reduces the hazards to workers. By the production process of ST-type Brad Nails can be known, ST-type Brad Nails can not be paper, plastic, straight and other nails of the production process for automated production. If the production process of ordinary nails is used, the raw material (steel wire) must first be heat-treated (quenching) and galvanised, and then these wires are made into wire strips. However, the strength and hardness of the steel wire is greatly increased after heat treatment, which will inevitably lead to difficulties in making nails, and the hardness of the mould is very demanding, while the zinc previously plated will also fall off in the violent.
Post time: Aug-31-2023