Operating Procedures:
Before starting the nail making machine, always strictly observe the following protocols
1. Never put your fingers in the gap between the nail and the nail gun. Because the muzzle entry angle is extremely small, the operator's fingers are easily injured. When nailing, the impact of the nail needle is very strong, which will lead to cracking of the nail gun, which will make the nail deformed or clogged in the muzzle, so the gun muzzle is not allowed to put the fingers or foreign objects.
Therefore, it is not permitted to put fingers or foreign objects into the muzzle of the gun.
2. Ensure that the nail is nailed in the correct position. Before operating the machine, place the nail in the reed to ensure that the front of the nail is facing the place of operation. And test the nail gun for cracking by holding the muzzle in your hand for one - shot before operation.
3. Determine the distance between the impact hammer head and the workpiece. Nail making machine impact hammer head should be close to the surface of the workpiece to ensure stable, correct nail force. If the impact force is too light or too large, the nail will be easily dislodged or embedded in the workpiece.
4. Two hands should be used when operating the nail making machine. -Hold the nail gun with one hand and aim the target at the workpiece, and hold the machine with the other hand to control the balance and stability of the machine. Ensure that the nail strikes are vertical, and when encountering crash-proof items, adjust out the machine camber or other handling methods.
5. When stopping the machine, please turn off the machine in time. The nail making machine should be emptied of the remaining nails before shutting down to avoid machine failure. It is also necessary to store the machine in a dry and ventilated place to minimize damage and corrosion of the machine.
Conclusion
Adhering to the safety procedures of the nail making machine is the key to preventing machine malfunctions and injuries. Before using the machine, it is important to prepare it to ensure the safety of the machine and personnel. Attention and focus should be maintained at all times when operating the machine to ensure that each nail strike is consistent, accurate and safe. If problems occur, emergency measures should be taken promptly to minimize damage.
Post time: Dec-27-2023