What are brad nails? brad nails are a series of production processes that effectively integrate regularly arranged nail units by means of a tacky adhesive to form a block of nails that are fixed in a regular arrangement.
The brad nails are one of a range of nails that are called brad nails because of their strength and hardness and their ability to be nailed into harder materials such as concrete.
Brad nails is a coil of wire (high, medium or low carbon steel) as raw material, by drawing machine several times dial pulling (cold drawing) to the wire diameter of the steel nails required by the nail making machine to produce the specifications of steel nails, quenching treatment by the heat treatment furnace, then polished by the polishing machine, then galvanised equipment for electroplating, the end of the manual glue, the steel nails will be glued into rows of qualified products.
At present we use production equipment mainly by nail making machine, wire drawing machine, polishing machine, knife grinding machine, tip rolling machine, heat treatment furnace, galvanizing equipment and manual nail row used by the tools.
Features of brad nails:
1. Individual steel nails with a diameter of 2.2mm and lengths of 18mm, 26mm, 38mm, 46mm, 50mm, 64mm and other different specifications.
2. The top and sides of the brad nails must be flat and not warped.
3. nail row need to have rigidity and strength: hold one end, the other end must not sink and break.
4. The nails must be in close contact with each other and there must be no gaps. The glue should be applied evenly, without lumps or bubbles, and the glue boundary should be limited to 10mm below the nail head.
Brad nails are widely used because of the above advantages. In actual use, if the steel nail forced into the wall may cause the steel nail bending and breaking, and ST-Type Brad Nails can be nailed into, it eliminates the common use of drill bits in the decoration of the wall after the nail into the wooden wedge after nailing steel nails (steel nails) easier to nail, the use of air pump air pressure should be in 0.4 ~ 0.8MPa, fixed objects should be selected nail degree longer than the hanging items 1.5cm – 2.5cm 2.5cm then firm and not easy to damage the wall.
Post time: Jun-09-2023