Three-axis rolling machine is more advanced mechanical equipment, many people are using, but if the use of improper use will occur accidents, then, the following together to understand the use of three-axis rolling machine precautions and use advantage analysis!
1, the coolant must use water-soluble emulsified coolant, strictly prohibit the use of oily coolant, can not be replaced by ordinary lubricants.
2, no coolant, thread rolling processing is strictly prohibited.
3, the end of the rebar to be processed must be flat, toothless saw down. It must be rounded within 500mm length of the end, no bending is allowed, and gas cutting or cutting machine undercutting end is not allowed to be processed directly.
4, the initial cutting feed should be uniform. Please don’t advance violently so as not to collapse the knife edge.
5、The slideway and slider should be cleaned and oiled regularly.
6、Iron chips must be cleaned up in time.
7、Cooling liquid tank should be cleaned once every six months.
8、Reducer must be regularly refueled to maintain the specified oil level.
9, rolling machine must be regularly maintained.
10, the machine tool shell must be reliably grounded before use.
The use and advantages of three-axis rolling machine
1 . Large range of knurling, parts above 1.5mm can be knurled, can be knurled mesh, straight line, thread, thin-walled pipe thread.
2 . Utilizing the triangular support method to ensure perpendicularity and concentricity, high precision and good quality of silk.
3 . The whole machine is made of cast steel with strong rigidity, simple and compact structure.
4 . Adopted in maintenance. Built-in oil tank, not easy to damage, easy maintenance, cleaner and sanitary appearance.
5 . Strong expandability, only need to add fully automatic feeding belt, can realize fully automatic production, very powerful.
6 . Adopting frequency conversion speed controller, can seamlessly switch spindle speed, adjust the speed arbitrarily, so that the cutting line parts with confidence.
Three-axis wire rolling machine is multifunctional cold extrusion molding machine. The three-axis wire drawing machine can thread, straight and twill roll cold workpieces within its lapping range. This is an advanced non-cutting processing technology, which can effectively improve the internal and surface quality of the workpiece, and the radial compressive stress generated during processing can greatly improve the fatigue strength and torsional strength of the workpiece.
Three-axis thread rolling machine can be conveniently processed a variety of tubular screws, but also for a variety of knurling, screen, straight wire and other processes; the use of equal triangular support operation to ensure roundness and perpendicularity, with a gauge and parking gauge is convenient to use a hydraulic (hydraulic) drive, easy to operate, the base is stable and durable, oil pipe joints, automobiles, motorcycles, bicycle parts and air conditioning pipe line evaporator, a variety of fasteners.
The above introduction is the use of three-axis rolling machine precautions and uses advantage analysis, if you want to know more, feel free to contact us!
Post time: Nov-14-2023